Details

• 160 mm (6 in.) diagonal pliers
• 190 mm (7-1/2 in.) linesman pliers
• 250 mm (10 in.) box joint pliers
• 160 mm (6 in.) long nose pliers
• 215 mm (8-1/2 in.) crimping pliers
• 4pc circlip pliers • 200 mm (8 in.) carpenter pincer
• 250 mm (10 in.) adjustable wrench
• 9pc combination wrench:
6, 8, 9, 10, 12, 13, 14, 17, 19 mm
• 6pc screwdriver: SL6.5 x 38 mm (1/4 x 1-1/2 in.),
5.5 x 100 mm (7/32 x 4 in.), 6.5 x 125 mm (1/4 x 5 in.);
PH2 x 38 mm (1-1/2 in.), 1 x 75 mm (3 in.),
2 x 100 mm (4 in.)
• 6pc precision screwdriver:
SL1.4, 2.0, 2.4, 3.0 mm; PH - 00, 0
• 9pc ball end hex key: 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 mm
• 300g machinist hammer
• 200 mm (8 in.) half round file
• 300 mm (12 in.) box level • 5m MID tape measure
• 18 mm snap off knife
• 10pc 18 mm snap off knife blade
• 180 mm (7 in.) scissors
• 250 mm (10 in.) hacksaw frame
• Terminal set • Digital multimeter
• 140 mm VDE tester 200 - 250V
• LED aluminium torch 2 x AA
• 6pc chisel & punch:
cold chisel 15 x 150 mm, 11 x 130 mm;
center punch 3 x 120 mm; taper punch 3 x 120 mm,
4 x 150 mm; cape chisel 4 x 130 mm
• Vernier caliper 150 mm (6 in.) x 0.02 mm (1/1000 in.)
• 12pc 1/2 in. Dr. socket:
10, 11, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24 mm
• 13pc 1/4 in. Dr. socket:
4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm
• 31pc bits set: SL4, 4.5, 5.5, 6, 6, 5, 8 mm
PH1 x 2, 2 x 3, 3
PZ1 x 2, 2 x 3, 3 HEX3 x 2, 4 x 2, 5, 6 mm
T-10, T-15, T20, T25, T30, T-40
• 2pc 1/4 in. Dr. extension bar:
50 mm (2 in.) & 100 mm (4 in.)
• 1/2 in. Dr. x 125 mm (5 in.) extension bar
• 2pc 1/2 in. Dr. spark plug socket: 16 & 21 mm
• 2pc ratchet handle: 1/2 in. Dr. & 1/4 in. Dr.
• 1/2 in. Dr. universal joint
• Quick change chuck
• 1/4 in. Dr. socket bit holder
• 1/4 in. Dr. sliding T bar
• 1/4 in. Dr. spinner handle
• 1/4 in. Dr. universal joint
• Aluminum case